|
|
|
|
|
|
|
|
|
|
|
|
TH-1 Catalyst
|
|
|
|
|
|
|
|
|
|
Series: Ti-Mg dry powder
|
|
|
|
|
|
|
|
|
Product introduction:
|
|
|
|
|
|
|
|
|
TH-1 is Ziegler-Natta Ti-Mg type catalyst with A,B and H series, equivalent to Univation UCAT™ A catalyst
|
|
to be used in Unipol gas-phase process and Ineos SDX catalyst to be used in innovene gas phase process
|
|
(without propolymerization) for producing LLDPE/MDPE/HDPE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TH-1 series
|
|
Productivity (kgPE/kgCAT)
|
|
Resin bulk density (g/cm3）
|
|
TH-1 A
|
|
|
5000~6000
|
|
|
|
≥0.36
|
|
|
|
TH-1 B
|
|
|
> 6000
|
|
|
|
≥0.38
|
|
|
|
TH-1 H
|
|
|
4000~5000
|
|
|
|
≥0.37
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TH-2 Catalyst
|
|
|
|
|
|
|
|
|
|
Series: Chrome dry powder
|
|
|
|
|
|
|
|
|
Product introduction:
|
|
|
|
|
|
|
|
|
TH-2 is organic chrome dry powder catalyst with A,B and C series, equivalent to UCAT™G catalyst to be
|
|
used in Unipol/Innovene (without prepolymerization) gas phase process for producing HDPE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TH-2 series
|
|
Al/Cr (mol/mol)
|
|
|
Productivity (kgPE/kgCAT)
|
|
TH-2A
|
|
|
（1~2）：1
|
|
|
5500~6000
|
|
|
|
TH-2B
|
|
|
(2~4) : 1
|
|
|
5000~5500
|
|
|
|
TH-2C
|
|
|
(4~6) : 1
|
|
|
4500~5000
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TH-3 Catalyst
|
|
|
|
|
|
|
|
|
|
Series: Chrome dry powder
|
|
|
|
|
|
|
|
|
Product introduction:
|
|
|
|
|
|
|
|
|
TH-3 is titanium modified inorganic chrome polyethylene catalyst, equivalent to Univation UCAT™B catalyst to
|
|
be used in Unipol PE gas-phase process for producing HDPE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TH-3 series
|
|
Ti,%
|
|
Cr,%
|
|
Volatiles,%
|
|
|
TH-3
|
|
|
1.0~4.0
|
|
0.10~0.50
|
≤2.0
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Resin grades and applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Resin Grade
|
Melt index g/10min
|
|
Density g/cm3
|
|
Comonomer
|
Applications
|
|
|
QHJ01
|
|
0.70
|
|
0.945
|
|
Butene
|
|
communication cables
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TH-7 Catalyst
|
|
|
|
|
|
|
|
|
|
Series: Ti-Mg dry powder
|
|
|
|
|
|
|
|
|
Product introduction:
|
|
|
|
|
|
|
|
|
TH-7 is Ziegler-Natta Ti-Mg type catalyst. It can be used in Hostalen、CX、Innovene S and other slurry
|
|
polymerization units to produce injection molding, extrusion, blow molding and other high-density
|
|
|
polyethylene resin, especially suitable for the production of PE-RT,PE100,PE100RC and other high value-added
|
|
products, the comprehensive performance has reached the domestic leading level.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TH-7 series
|
|
TH-7A
|
|
TH-7B
|
TH-7C
|
TH-7D
|
|
|
Polymerization process
|
|
CX
|
|
Hostalen
|
Innovene S
|
|
|
Morphology
|
|
|
|
|
Dry powder/Slurry
|
|
|
|
Appearance
|
|
|
|
|
Light yellow
|
|
|
|
Ti, wt%
|
|
|
|
|
|
4.0~10.0
|
|
|
|
APS (D50), μm
|
|
|
|
|
4.0~12.0
|
|
|
|
Mileage,kgPE/kgCAT
|
|
|
|
≥30000
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
產品說明
